features

2013/05/21

LED Light Design Contest|Design Specs

 Winners | Design Specs | About 3D Printing | How to Enter | Entry Conditions | Entries | Overview | Prototype Report  |

Design Specs

Please create your design using the following specifications

1. Design your own new light bulb shape. You can use the LED light bulb format, if you want. It can be a sketch or an image.

2. The light design needs to be able to be printed with the 3D printer in the form of a cover to go over a LED light bulb (E-17 base). (The actual LED light bulb itself cannot be printed.)

3. The light is to be hung from above.

4. Three materials that can be used in the 3D printer; acrylic, polyamide, and ABS.

5. The materials come in white, creamy white, and clear.

*In some cases, depending on the material, it is possible to choose simple colors such a blue or yellow when doing the 3D printing, but when creating your design please assume that materials only come in white, creamy white, and clear.

*Contest organizers will select the best suited materials to create the winning designs with, but if entrants wish to use a particular material, they should specify this in the design explanation section.


Light-bulb specs: LED light bulb (E-17 base)
Dimensions: Outer diameter: 35mm , Length: 67mm



Sample Works

We used the 3D printer to bring to life some design ideas from designer Kentaro Kato, who is also acting as one of the judges for this contest. Let’s take a look what types of lights were created from Kentaro’s sketches.


1. USAGI (RABBIT) 

This design is an upside-down rabbit. The idea behind it was to demonstrate that the light bulb cover can take on any shape or form. It breaks the stereotype that lamps must look like light bulbs with its free and unique design. It’s made using UV-cured acrylic resin.

2. UNI (SEA URCHIN)
ball_B_re

This design represents objects emanating radially from the center like the sun, sea urchins and chestnuts in their burrs. The thin spikes like those on a sea urchin have been turned around so that they are on the inside of the sphere. That way, even though it’s got spikes, it’s completely safe. When you turn it on, it gives of a very soft light. This complex design can only be reproduced with a 3D printer, and is incapable of being made with conventional metal molds. It is made using UV-cured acrylic resin.



>>How to Enter

page top

Related article

  • img

    Get ready for PauseDraw × SKETCH NOTE Tokyo & Kyoto!

    How’s that person beside me drawing? Let’s get together and draw! 【NEWS】 The event will be also held in Kyoto on 29th To commemorate the release of the only SKETCH NOTE in the world that can produce notes, we will be getting together for the sketching event PauseDraw × SKETCH NOTE on Sunday May 22n…

    2016/04/21Event
  • img

    Event Report “ Drawing To Go – Grab a cup of coffee and draw ! ”

    On Saturday, October 10th, we held “Drawing To Go,” a workshop where participants used coffee cups as their canvases.“Drawing To Go” is a project by illustrator Mariya Suzuki in which sceneries and people are drawn on disposable coffee cups.What sorts of scenes will appear on the cups, from the eyes…

    2015/10/19Event
  • img

    Strange Creatures? – Monsters and Creatures Artwork Feature

    Artwork by JerkyIs that an imaginary animal or a life form born by the whim of God?With Halloween approaching, Loftwork.com has decided to unearth and present “strange creatures” that do not fit existing biological categories.This feature will be running from October 12th through November 1st.We’d…

    2015/10/16Event
page top